SIPA PPS 56 Preform Injection Moulding systems (4 off)

SIPA PPS 56 Preform Injection Moulding systems_2002-01
SIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systemsSIPA PPS 56 Preform Injection Moulding systems

41 more images...

Year of Manufacture: 2002
Condition: Very Good
Availability: December 2018
Sold Status: For Sale

Available are (4) SIPA PPS 56 Preform Injection Moulding systems. Systems can be sold separate from each other.

#1 SIPA PPS 56 P95/E120 Preform injection moulding system (2002)
– working hours: 63,407 hrs.

includes:
* Plastic Systems DR 216 HT resin dryer
* Plastic Systems H4000 PET material hopper
* Eisbär mould dehumidifier
* MB Conveyors outfeed conveyors
* Vibration pads
* Plastic Systems P5FC3 vacuum loader
* Mezzanine

* SIPA 56 cavity preform mould for 9.8gm 29/25 preforms
– pitch 50 x 150
– change parts for 11.2gm 30/25 preforms
* SIPA 56 cavity preform mould for 14.1gm 30/25 preforms
– change parts for 16.0gm 30/25 preforms


#3 SIPA PPS 56 P95/E120 Preform injection moulding system (2002)

– working hours: 51,256 hrs.

includes:
* Plastic Systems DR 216 HT resin dryer
* Plastic Systems H4000 PET material hopper
* Eisbär mould dehumidifier
* MB Conveyors outfeed conveyors
* Vibration pads
* Plastic Systems P5FC3 vacuum loader
* Mezzanine

* SIPA 48 cavity preform mould for 38.0gm 30/25 preforms
– pitch 60 x 152
– change parts for 40.0gm 30/25 preforms
– change parts for 41.5gm 30/25 preforms
– change parts for 44.0gm 30/25 preforms

#4 SIPA PPS 56 P95/E120 Preform injection moulding system (2002)
– working hours: 49,816 hrs.

includes:
* Plastic Systems DR 216 HT resin dryer
* Plastic Systems H4000 PET material hopper
* Eisbär mould dehumidifier
* MB Conveyors outfeed conveyors
* Vibration pads
* Plastic Systems P5FC3 vacuum loader
* Mezzanine

* SIPA 48 cavity preform mould for 38.0gm 30/25 preforms
– pitch 60 x 152
– change parts for 40.0gm 30/25 preforms
– change parts for 41.5gm 30/25 preforms
– change parts for 44.0gm 30/25 preforms


#2 SIPA PPS 56 P95/E120 Preform injection moulding system (2002)
– This machine has been used for spare parts and is not suitable for production

includes:
* Plastic Systems DR 216 HT resin dryer
* Plastic Systems H4000 PET material hopper
* Eisbär mould dehumidifier
* MB Conveyors outfeed conveyors
* Vibration pads
* Plastic Systems P5FC3 vacuum loader
* Mezzanine

Additionally available:

* SIPA 48 cavity preform mould for 21.0gm 38mm (custom) preforms
– pitch 60 x 152
– Possibility to only purchase the Hot Runner. Otherwise this mould will be delivered without neck rings as the 38mm finish is proprietary.
– change parts are included for 24.0gm, 39.0gm and 42.8gm 38mm preforms

* Spare 56 cavity Hot Runner (needs maintenance)

Preform drawings available upon request.
All 3 machines can be inspected in production until December 1, 2018. Available for release starting that date.
They have been well maintained and are in very good working condition.

Video available:

Enquire about this product

Product

Your Name (required)

Your Email (required)

Your Phone (required)

Notes

Are you human?