Nissei ASB 650 EXHD Injection Stretch Blow Moulding machine
Nissei ASB 650 EXHD Injection Stretch Blow Moulding machine, year 2000
Working hours: 51,000 hrs.
Recently revised, with the following work done:
Oil tank: flushed & cleaned magnets
Toshiba motors: disassembled, cleaned, inspected bearing journals, bearing housing, windings, stator, rotor & casing, new ball bearings, dipped, test run.
Hydraulic pumps: V1 – new bearing, shaft seal & O-rings. V2 – brand new unit
Inspected chain coupler & greased up.
Heater exchange: removed, cleaned, dipped, replaced gaskets, zinc bars and pressure tested.
Hydraulic valves: replaced all O-rings
Upper, Lower, Blow Mould Cylinders: New seals
All air cylinders: new seals
Barrel heaters: inspected electrical wires, connections and thermo couples.
HMI: new Fuji version
New Lexan 1/4″ thick
* 2-cavity 5.0 gallon PC Blow moulds
Machine will run PET without issue, immediately available.