2018 Magic ME-L20/D-T35-LS Full Electric Double Station Extrusion Blow Moulding machine

Magic ME-L20/D-T35-LS Full Electric Double Station Extrusion Blow Moulding machine, year 2018

Only approx. 500 working hours! In excellent condition

Machine complete with:

* Extruder diameter (mm): 120 APM manufactured by Magic.– electrically driven, with bobbing movement.– three-phase asynchronous motor with digital inverter.– water cooled raw material feeding zone (programmable control valve).

* Nitrited screw (hardness 1050 Vickers) for HDPE/PP – L/D=24– plasticization capacity in virgin HDPE 450 kg/h.

* 10-way spider type head with single block bended neck, for HDPE/PP.– three-points die centering from the front.

* Electro-mechanical clamping system.

* Electro-mechanical linear carriage movement.

* Parison thickness control system with 300-point profile, integrated into Siemens control panel.

* Servo-actuators with integrated electronics.

* Parison length control via screw RPM and photocell.

* Electrically driven blow pin movement for neck calibration, by means of actuator and brushless motor with digital adjustment.

* Time-controlled blowing in three ramps via programmable proportional valve.

* Pre-blow in low pressure.

* Parison cutting: shear cutter with programmed air.

* Microprocessor control board Siemens (Microbox), with flat panel IFP.

* Gates and guards with safety interlocks, with inspection windows in polycarbonate.

* Programmable centralized lubrification, by means of 1 pump and 2-way valve.

* Machine according to EC norms.

Technical data:

Max mould dimensions (L x W x H): 1290 – 2x 180 – 480

Opening stroke: 380 mm

Total installed electric power: 208.2 kW

Does not include any ancillaries or blow moulds.

Machine has been recently dismantled and moved to warehouse to make space for new equipment.

Immediately available.